Displaying publications 41 - 60 of 493 in total

Abstract:
Sort:
  1. Chew N, Noor Azhar AM, Bustam A, Azanan MS, Wang C, Lum LCS
    PLoS Negl Trop Dis, 2020 09;14(9):e0008562.
    PMID: 32881914 DOI: 10.1371/journal.pntd.0008562
    BACKGROUND: Dengue is a systemic and dynamic disease with symptoms ranging from undifferentiated fever to dengue shock syndrome. Assessment of patients' severity of dehydration is integral to appropriate care and management. Urine colour has been shown to have a high correlation with overall assessment of hydration status. This study tests the feasibility of measuring dehydration severity in dengue fever patients by comparing urine colour captured by mobile phone cameras to established laboratory parameters.

    METHODOLOGY/PRINCIPAL FINDINGS: Photos of urine samples were taken in a customized photo booth, then processed using Adobe Photoshop to index urine colour into the red, green, and blue (RGB) colour space and assigned a unique RGB value. The RGB values were then correlated with patients' clinical and laboratory hydration indices using Pearson's correlation and multiple linear regression. There were strong correlations between urine osmolality and the RGB of urine colour, with r = -0.701 (red), r = -0.741 (green), and r = -0.761 (blue) (all p-value <0.05). There were strong correlations between urine specific gravity and the RGB of urine colour, with r = -0.759 (red), r = -0.785 (green), and r = -0.820 (blue) (all p-value <0.05). The blue component had the highest correlations with urine specific gravity and urine osmolality. There were moderate correlations between RGB components and serum urea, at r = -0.338 (red), -0.329 (green), -0.360 (blue). In terms of urine biochemical parameters linked to dehydration, multiple linear regression studies showed that the green colourimetry code was predictive of urine osmolality (β coefficient -0.082, p-value <0.001) while the blue colourimetry code was predictive of urine specific gravity (β coefficient -2,946.255, p-value 0.007).

    CONCLUSIONS/SIGNIFICANCE: Urine colourimetry using mobile phones was highly correlated with the hydration status of dengue patients, making it a potentially useful hydration status tool.

    Matched MeSH terms: Color; Colorimetry/instrumentation; Colorimetry/methods*
  2. Ojukwu M, Tan JS, Easa AM
    J Food Sci, 2020 Sep;85(9):2720-2727.
    PMID: 32776580 DOI: 10.1111/1750-3841.15357
    A process for enhancing textural and cooking properties of fresh rice flour-soy protein isolate noodles (RNS) to match those of yellow alkaline noodles (YAN) was developed by incorporating microbial transglutaminase (RNS-MTG), glucono-δ-lactone (RNS-GDL), and both MTG and GDL into the RNS noodles (RNS-COM). The formation of γ-glutamyl-lysine bonds in RNS-COM and RNS-MTG was shown by sodium dodecyl sulfate polyacrylamide gel electrophoresis. Scanning electron microscope showed that compared to others, the structure of RNS-COM was denser, smoother with extensive apparent interconnectivity of aggregates. The optimum cooking time was in the order: YAN > RNS-COM > RNS-MTG > RNS-GDL > RN (rice flour noodles); tensile strength was in the order: YAN > RNS-COM > RNS-MTG > RNS-GDL > RN; and elasticity were in the order: YAN > RNS-COM > RNS-MTG, RNS-GDL > RN. Overall, RNS-COM showed similar textural and structural breakdown parameters as compared to those of YAN. Changes in microstructures and improvement of RNS-COM in certain properties were likely due to enhanced crosslinking of proteins attributed to MTG- and GDL-induced cold gelation of proteins at reduced pH value. It is possible to use the combination of MTG and GDL to improve textural and mechanical properties of RNS comparable to those of YAN. PRACTICAL APPLICATION: Combined MTG and GDL yield rice flour noodles with improved textural properties. The restructured rice flour noodles have the potential to replace yellow alkaline noodles.
    Matched MeSH terms: Color
  3. Najmuddin MF, Haris H, Othman N, Zahari F, Mohd-Ridwan AR, Md-Zain BM, et al.
    Data Brief, 2020 Aug;31:105727.
    PMID: 32548216 DOI: 10.1016/j.dib.2020.105727
    Morphism refer to polymorphic species, in which multiple colour variants coexist within a population. Morphism in primates is common and langurs also exhibit certain characteristics of morphism, such as conspicuous natal coats. Banded langurs (Presbytis femoralis) and dusky leaf monkey (Trachypithecus obscurus) exhibits the same characteristics of conspicuous natal coats, but these coats are only limited to infants and changed when they reached adulthood. This article reports the first discovery of rare brown morph of two adult male banded langurs and one leucistic adult female dusky leaf monkey in Malaysia. We also conducted a systematic literature search to review the diversity of morphism in leaf monkey globally.
    Matched MeSH terms: Color
  4. Kamal NSS, Tan HH, Ng CKC
    Zootaxa, 2020 Jul 22;4819(1):zootaxa.4819.1.11.
    PMID: 33055678 DOI: 10.11646/zootaxa.4819.1.11
    Betta nuluhon, new species, is described from a hill stream habitat in western Sabah. This species is allied to both B. chini and B. balunga, and differs from rest of its congeners in the B. akarensis group in having the following combination of characters: yellow iris when live; mature males with greenish-blue iridescence on opercle when live; mature fish with distinct transverse bars on caudal fin; slender body (body depth 22.1-25.2 % SL); belly area with faint reticulate pattern (scales posteriorly rimmed with black); absence of tiny black spots on anal fin; lateral scales 29-31 (mode 30); predorsal scales 20-21 (mode 20). Notes on a fresh series of B. chini are also provided.
    Matched MeSH terms: Color
  5. Ng SP, Khor YP, Lim HK, Lai OM, Wang Y, Wang Y, et al.
    Foods, 2020 Jul 03;9(7).
    PMID: 32635372 DOI: 10.3390/foods9070877
    The present study focused on investigating the storage stability of oil-in-water (O/W) emulsions with high oil volume fractions prepared with palm olein-based diacylglycerol oil (POL-DAG)/soybean oil (SBO) blends at 25 °C. The incorporation of different ratios of oil blends significantly influenced (p < 0.05) the texture, color, droplet size distribution, and rheological parameters of the emulsions. Only emulsions incorporated with 10% to 20% POL-DAG in oil phase exhibited pseudoplastic behavior that fitted the Power Law model well. Furthermore, the O/W emulsions prepared with POL-DAG/SBO blends exhibited elastic properties, with G' higher than G". During storage, the emulsion was found to be less solid-like with the increase in tan δ values. All emulsions produced with POL-DAG/SBO blends also showed thixotropic behavior. Optical microscopy revealed that the POL-DAG incorporation above 40% caused aggregated droplets to coalesce and flocculate and, thus, larger droplet sizes were observed. The current results demonstrated that the 20% POL-DAG substituted emulsion was more stable than the control emulsion. The valuable insights gained from this study would be able to generate a lot more possible applications using POL-DAG, which could further sustain the competitiveness of the palm oil industry.
    Matched MeSH terms: Color
  6. Low YL, Pui LP
    Acta Sci Pol Technol Aliment, 2020 7 1;19(2):207-218.
    PMID: 32600017 DOI: 10.17306/J.AFS.0752
    BACKGROUND: The bite-sized jelly sphere with a gelatinous exterior and fruit puree interior is a type of innovative fruit-based dessert. This study aimed to produce jelly spheres with a gelatinous exterior and mangopineapple puree interior by using frozen reverse spherification.

    METHODS: A full factorial design (23) was applied to study the effects of mango-pineapple ratio (x1), immersion time in sugar solution (x2), and concentration of sugar solution (x3) in the production  of mango-pineapple jelly spheres using frozen reverse spherification. The responses studied were the physicochemical properties (color, total soluble solids, and texture) and sensory evaluation of mango-pineapple jelly spheres.

    RESULTS: Mango-pineapple ratio had a positive effect on a* and b* while having a negative effect L* value on the jelly sphere. Total soluble solids of jelly spheres were influenced by both immersion time in sugar solution and concentration of sugar solution. Immersion time in sugar solution had a positive effect on the peak force of the compression cycle and deformation at peak load while having a negative effect on the total soluble solid of jelly spheres. On the other hand, the concentration of sugar solution had a positive effect on the sensory evaluation in terms of flavor, texture, and overall acceptability. The desirability function approach was used to optimize the factors, and an overall desirability of 0.89 for all responses was achieved with 1.28:1 mango-pineapple ratio, 30 mins immersion time in sugar solution, and 22°Brix sugar solution. A proximate analysis of the optimized mango-pineapple jelly spheres had an energy content of 73.18 kcal/100 g and showed nutrient values of 81.11% moisture, 0.10% ash, 0.46% protein, 0% fat, 0.97% total dietary fiber, and 17.35% digestible carbohydrate.

    CONCLUSIONS: The development of the optimal mango-pineapple jelly sphere allows food producers to produce a dessert that is low in calories, with a good appearance and consumer acceptability.

    Matched MeSH terms: Color
  7. Khaw SK, Teo SC, Bujang MA
    Med J Malaysia, 2020 07;75(4):379-384.
    PMID: 32723998
    INTRODUCTION: A proper prioritisation system of emergency cases allows appropriate timing of surgery and efficient allocation of resources and staff expertise. The aim of this study was to determine the impact of colour coding classification on Time-to- theatre (TTT) of patients in comparison with the normal practice.

    METHOD: Categorisation was a surgical judgment call after thorough clinical assessment. There were 4 levels of urgency with their respective TTT; Red (2 hours), Yellow (8 hours), Green (24 hours), Blue (72 hours). Caesarean cases were excluded in colour coding due to pre - existing classification. The data for mean TTT was collected 4 weeks before the implementation (Stage 1), and another 4 weeks after implementation (Stage II). As there was a violation in the assumption for parametric test, Mann Whitney U test was used to compare the means between these two groups. Using logarithmic (Ln) transformation for TTT, Analysis of Covariance (ANCOVA) was conducted for multivariate analysis to adjust the effect of various departments. The mean TTT for each colour coding classification was also calculated.

    RESULTS: The mean TTT was reduced from 13 hours 48 min to 10 hours, although more cases were completed in Stage II (428 vs 481 cases). Based on Mann-Whitney U test, the difference in TTT for Stage I (Median=6.0, /IQR=18.9) and Stage II (Median=4.2, IQR=11.5) was significantly different (p=0.023). The result remained significant (p=0.039) even after controlled for various department in the analysis. The mean/median TTT after colour coding was Red- 2h 24min/1h, Yellow- 8h 26min/3h 45 min, Green- 15h 8min/8h 15min, and Blue- 13h 46min/13h 5min.

    CONCLUSION: Colour coding classification in emergency Operation (OT) was effective in reducing TTT of patients for non-caesarean section cases.

    Matched MeSH terms: Color*
  8. Ong Chin Feng W, Wan Hitam WH
    Taiwan J Ophthalmol, 2020 06 20;10(3):189-196.
    PMID: 33110750 DOI: 10.4103/tjo.tjo_22_20
    Purpose: Peripapillary retinal nerve fibre layer (RNFL) thickness might be useful in monitoring ongoing subclinical structural damage especially in eyes with no history of optic neuritis (ON) in neuromyelitis optica (NMO).

    Objective: To evaluate the peripapillary RNFL thickness and optic nerve functions in fellow eye of NMO with unilateral optic neuritis.

    Materials and Methods: A comparative cross-sectional study was conducted in 2 tertiary hospitals from August 2017 to May 2019. RNFL thickness and optic nerve functions were evaluated. Statistical analysis was performed using Statistical Package for Social Science version 24.

    Results: A total of 26 NMO patients and 26 controls were involved in this study. The median age (IQR) of NMO patients was 32.5 (12) years old. The RNFL thickness was significantly reduced in NMO patients with non-ON eyes as compared to control group. Best corrected visual acuity between the 2 groups were comparable (0.20 vs 0.00, p=0.071). Contrast sensitivity was also reduced in NMO patients (non-ON eyes) at all 5 spatial frequencies. In NMO group, 34.6% have normal colour vision. The mean deviation (MD) of Humphrey visual field (HVF) was higher in NMO group (p<0.001). There was a moderate correlation between RNFL thickness and contrast sensitivity. Weak correlation was found between the RNFL thickness with visual acuity and mean deviation of visual field test.

    Conclusion: Our study showed that the fellow eye of NMO patients with unilateral ON revealed a significant reduction in RNFL thickness and all the optic nerve functions have subtle early changes that signify a subclinical retinal damage.

    Matched MeSH terms: Color Vision
  9. Ab Aziz MF, Hayat MN, Kaka U, Kamarulzaman NH, Sazili AQ
    Foods, 2020 Jun 04;9(6).
    PMID: 32512753 DOI: 10.3390/foods9060741
    Storage temperature and duration plays an important role in meat processing. Observations in poultry processing plants have shown a serious deviation in storage condition compared to the recommended procedures. Furthermore, there is still a paucity of evidence on the effects of storage temperature and duration on meat quality and microbial population. The aim of this study was to determine the effects of different temperature and duration during storage on physico-chemical properties and microbiological quality of broiler chicken Pectoralis major muscle. Eighty birds were slaughtered and processed, following which the packed boneless breast (PBB) (each bird was to provide two breast muscle samples; left breast and right breast) was divided into four groups, each consisted of 40 PBB. Each group was subsequently assigned to storage either at 4 °C, -10 °C, -18 °C or -40 °C, for 24 h before 20 PBB samples from each group were transported to the respective laboratory for meat quality and microbiological analysis. The remaining 20 PBB from each storage temperature were stored for 72 h before being transported for analysis. Results have shown significant increases in drip loss and cooking loss as the storage temperature decreases. Similarly, storage duration significantly affected cooking loss, of which, samples stored for 72 h exhibited higher cooking loss compared to those stored for 24 h. For color, significant differences were only observed in lightness (L*) and redness (a*) values. Longer duration of storage had significantly improved tenderness whereby, samples that have been stored for a shorter duration presented higher pH values. Populations of coliform and Salmonella decreased significantly with decreasing temperature and increasing storage duration.
    Matched MeSH terms: Color
  10. Kunwar MA, Muhammad I, Khan MN, Sumreen B, Soomro NA, Naseeb K, et al.
    Cureus, 2020 Jun 03;12(6):e8419.
    PMID: 32642335 DOI: 10.7759/cureus.8419
    Background Acute myocardial infarction (MI) is the leading cause of worldwide cardiac morbidities and mortalities. Mitral regurgitation (MR) is a common complication of MI. The severity of ischemic MR (IMR) can range widely, both clinically and hemodynamically. Mitral valve (MV) repair by lifting annuloplasty is a surgical procedure used to correct the pathology of IMR. The immediate outcomes of this technique have not yet been determined. The present study, therefore, evaluated the immediate results of MV annuloplasty performed to complement MV repair in patients with IMR. Methodology All adult patients with IMR who underwent lifting posterior mitral annuloplasty (LPMA) plus concomitant coronary artery bypass grafting (CABG) were included. Immediate outcomes were evaluated by transesophageal color Doppler echocardiography. The frequency of successful outcomes was compared in patients with different baseline characteristics. Results Posterior mitral annuloplasty was successful in 93.1% of patients, including in 92.8% of men and 94.1% of women. The percentages of successful immediate outcomes differed significantly in patients with and without diabetes and hypertension, and in patients with two- and three-vessel disease. Conclusion LPMA resulted in a high percentage of successful immediate outcomes in patients with IMR. Further studies should compare rates of immediate, intermediate, and late outcomes of this technique.
    Matched MeSH terms: Echocardiography, Doppler, Color
  11. Seak CJ, Lim MWX, Seak JC, Goh ZNL, Seak CK
    QJM, 2020 06 01;113(6):434-435.
    PMID: 31816086 DOI: 10.1093/qjmed/hcz314
    Matched MeSH terms: Color*
  12. Aliteh NA, Minakata K, Tashiro K, Wakiwaka H, Kobayashi K, Nagata H, et al.
    Sensors (Basel), 2020 Jan 23;20(3).
    PMID: 31979252 DOI: 10.3390/s20030637
    Oil palm ripeness' main evaluation procedure is traditionally accomplished by human vision. However, the dependency on human evaluators to grade the ripeness of oil palm fresh fruit bunches (FFBs) by traditional means could lead to inaccuracy that can cause a reduction in oil palm fruit oil extraction rate (OER). This paper emphasizes the fruit battery method to distinguish oil palm fruit FFB ripeness stages by determining the value of load resistance voltage and its moisture content resolution. In addition, computer vision using a color feature is tested on the same samples to compare the accuracy score using support vector machine (SVM). The accuracy score results of the fruit battery, computer vision, and a combination of both methods' accuracy scores are evaluated and compared. When the ripe and unripe samples were tested for load resistance voltage ranging from 10 Ω to 10 kΩ, three resistance values were shortlisted and tested for moisture content resolution evaluation. A 1 kΩ load resistance showed the best moisture content resolution, and the results were used for accuracy score evaluation comparison with computer vision. From the results obtained, the accuracy scores for the combination method are the highest, followed by the fruit battery and computer vision methods.
    Matched MeSH terms: Color
  13. Dzun Noraini Jimat, Istisyhad Mohamad, Azura Amid, Azlin Suhaida Azmi, Mohd Firdaus Abd. Wahab
    MyJurnal
    Cellulose facial masks have gained a huge interest in the cosmetic industry. Cellulose can be extracted from plant biomass, bacteria and algae. In this study, several formulated PVA-based facial masks (F1, F2, F3, F4) incorporated with microfibrillated cellulose extracted from sugarcane bagasse (MFC-SCB) were prepared. The concentration of polyvinyl alcohol (PVA) was varied (5%–20% (w/w)) while the concentration of microfibrillated cellulose of sugarcane bagasse (MFC-SCB) was fixed at 5% (w/w) to get the appropriate composition of the facial masks. The MFC-SCB was
    extracted through chemical treatment assisted with ultrasonication. Sensory tests in terms of adhesion to the skin, spreadability, color, odor, and drying time were performed. These tests were carried out by requesting the volunteers to rate the performance of the masks. The results showed that the formulated facial mask F3 (15% [w/w] of PVA and 5% [w/w] of MFC-SCB) has the highest average score (13.9) which is 82% from the total score compared to other formulated masks. However, the standard formulation mask F5 (15% [w/w] of PVA and 5% [w/w] of sodium carboxylmethyl cellulose, CMC) achieved the highest score (13.5) compared to F3 (12.5). The findings of this study proved that the presence of MFC-SCB with PVA has a competitive performance with the standard facial mask formulation.
    Matched MeSH terms: Color
  14. Zhao TT, Han HL
    Zookeys, 2020;985:127-141.
    PMID: 33223877 DOI: 10.3897/zookeys.985.54047
    In this paper, four species of the genus Diduga Moore, [1887] from China (Chongqing and Guangdong) and Malaysia (Borneo, Sabah) are described as new to science, namely D. simianshanasp. nov., D. chebalingasp. nov., D. chewisp. nov., and D. hollowayisp. nov. Adults of these species are illustrated in color, and images of the male and female genitalia are provided. A distribution map of the new species is provided, together with an updated checklist of all species of Diduga.
    Matched MeSH terms: Color
  15. Nurain Azmi, Sabirin Mustafa, Nur Hazirah Mohd Yunos, Wan Nor Azlin Wan Mohd Sakri, Muhammad Nazzim Abdul Halim, Amin Aadenan
    MyJurnal
    In this paper, a simple analysis yet a straight forward method of determining the Planck’s constant by
    evaluating the stopping potential of five different colors of light emitting diodes (LEDs) is presented.
    The study aimed to identify the Planck’s constant based on the relationship between the potential
    difference of LEDs to their respective frequencies under room temperature with low illumination of
    ambient light by applying a simple theoretical analysis. The experiment was performed by connecting
    the circuit in series connection and the voltage reading of LEDs were recorded and then presented in a
    graph of frequency, f versus stopping voltage, Vo. To determine the Planck’s constant, the best fit line
    was analyzed and the centroid was also identified in order to find the minimum and maximum errors
    due the gradient of the graph. From the analysis, results showed that the Planck constant value was
    (5.997 ± 1.520) × 10–34 J.s with approximately 10% of deviation from the actual value. This
    demonstrates that a simple analysis can be utilized to determine the Planck’s constant for the purpose
    of the laboratory teaching and learning at the undergraduate level and can be served as a starting point
    for the students to understand the concept of quantization of energy in Modern Physics more
    effectively. This is to further suggest that the Planck’s constant can be identified via a low-cost and
    unsophisticated experimental setup.
    Matched MeSH terms: Color
  16. Rohani Abu Bakar, Asrul Mustafa
    MyJurnal
    Adhesives serve many functions in daily life, starting from sticking envelopes to rejoining broken
    materials. Adhesives are usually developed for a specific purpose and the performances can vary
    according to their specific end-use. Most of the commercially available adhesives comprised nonrenewable or petroleum derived raw materials. Thus, in order to mitigate negative impact of using nonrenewable material as the raw material for adhesives, a new type of adhesive containing epoxidised
    natural rubber (NR) latex is developed. Epoxidised NR latex adhesive was initially prepared and pigment
    was subsequently added to produce desired colours of the adhesive. Hence, the newly developed adhesive
    can serve as adhesive and also as paint for art. The adhesives were characterised and the results indicated
    that they were free from heavy metal contents and volatile organic compounds (VOCs). The adhesives
    exhibited comparable odour concentration to commercial synthetic-based adhesive. In terms of toxicity
    level, the adhesive developed exhibited low acute oral toxicity. Peel adhesion test of A4 and drawing
    papers on stainless steel and glass substrates, opacity and glossiness were also investigated in the present
    study. This coloured adhesive is deemed to support the STEM (science, technology, engineering and
    mathematics) learning by indirectly imparting polymer science and technology in art education and
    further promotes creative learning among school children. The adhesive is also derived from renewable
    material rendering it more environmentally friendly.
    Matched MeSH terms: Color
  17. Chung RCK, Soepadmo E
    PhytoKeys, 2020;161:99-106.
    PMID: 33100836 DOI: 10.3897/phytokeys.161.55781
    A new species of Diplodiscus is described and illustrated from one collection made in lowland mixed dipterocarp forest in Sabah, Malaysia. Conspicuous by its twig colour, leaf shape and indumentum, it is probably allied to D. longifolius, but differs in sufficient characters (shape, indumentum, apex and venation of blade, flower bud shape and size, petal diameter, ovary shape and fruit shape and size) to be a species in its own right. A key to the species of Diplodiscus in Malaysia also is provided.
    Matched MeSH terms: Color
  18. Syahida-Emiza S, Sam YY, Siti-Munirah MY
    PhytoKeys, 2020;165:51-62.
    PMID: 33192145 DOI: 10.3897/phytokeys.165.56955
    Two new Codonoboea species, C. kenaboiensis Syahida-Emiza, Y.Y.Sam & Siti-Munirah and C. ruthiae Syahida-Emiza, Y.Y. Sam & Siti-Munirah were discovered from the Kenaboi State Park, Peninsular Malaysia. Descriptions, illustrations, colour plates and provisional conservation status are provided.
    Matched MeSH terms: Color
  19. Adam Linoby, Jamiaton Kusrin, Muhammad Iskandar Asraff, Muhammad Azamuddin Rodzi, Sufyan Zaki, Hosni Hasan
    Jurnal Inovasi Malaysia, 2020;4(1):193-208.
    MyJurnal
    The conventional heart rate monitor is usually developed with a numeric digital display. This numerical view is obviously not practical to be used during exercise. In this study, the iOS-based mobile application, called Chromozone, was developed to monitor heart rate using the universal color-coding system. The heart rate monitor during the exercise is designed to notify the exercise intensity information to users using the three universal color-coded (i.e. green zone: optimal heart rate; yellow zone: heart rate lower than the optimal zone, and red zone: heart rate higher than the optimal zone). Chromozone is programmed to display uniform colors across the smart phone display, which allows users to easily be informed in regards to the state of exercise intensity. The transfer of heart rate data from the chest transmitter to Chromozone application is designed to use Bluetooth Low Energy (BLE) system technology. The heart rate data is then processed by the application to determine the intensity range of exercise training heart rate based on the user’s personal input (i.e. age, gender, fitness levels and training objective). Preliminary analysis found that Chromozone application is effective in delivering real-time exercise intensity heart rate. Chromozone could potentially help athletes, active individuals and clinical populations to monitor and regulate their workout training regime in a more effective and safer manner.
    Matched MeSH terms: Color
  20. Hassanin Abdulkhabeer Ali Alyassiri, Anis Farhan Kamaruddin, Khoirulzariah Ismail, Noor Ayuni Ahmad Shafiai, Norma Ab Rahman, Wan Muhamad Amir W Ahmad
    MyJurnal
    Introduction: Coated archwires improve aesthetics during orthodontic treatment. However, little is known regarding
    their clinical benefit. This randomised controlled trial (RCT) compared the tooth alignment (TA), coating loss (CL),
    colour change (∆E*), and patient perception of coated archwires with their controls. Details of ∆E* and perception were reported in the second part of the articles. Methods: This RCT was done at three centres. Participants
    were randomised to receive one of four treatment interventions using 0.014” superelastic coated nickel-titanium
    archwires from Orthocare, RMO, G&H, and conventional uncoated 3M Unitek® archwires. These archwires were
    ligated during bonding and collected after eighth week and questionnaires were distributed to participants in the
    experimental groups only. After removal, TA and CL were measured using Little’s Irregularity Index and Autodesk®
    AutoCAD® software, respectively. At the time of this preliminary reporting, 84 participants had completed the trial. Two archwires fractured and were excluded. Therefore, 166 archwires (n = 166) were analysed. Results: Only
    non-extraction cases showed statistically significant differences in TA change between all groups (p = 0.005) and
    RMO showed significantly lowest mean of TA (1.5 mm). RMO and Orthocare showed significant TA change in the
    upper and lower arches (p = 0.037, 0.048). CL was found to be insignificant for both extraction and non-extraction
    cases (p >0.05). Comparison between upper and lower arches revealed no significant difference in TA and CL in all
    groups (p >0.05). Conclusion: From this preliminary analysis, Orthocare provides better TA in non-extraction cases
    despite highest percentage of coating loss.
    Matched MeSH terms: Color
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links